Coarse / Medium Final G Mops Polishing Sisal Floppy Mop 10" x 0.5" 1 Section 3p

Description

Coarse / Medium Final G Mops Polishing Sisal Floppy Mop 10" x 0.5" 1 Section 3p
Description
COARSE POLISHING MOP
Professional tool for commercial or occasional use
Coarse sisal mop
Suitable for removing scratches and bad staining as well as paint and rust.
Fast cutting first stage polishing mop.
Coarse buffing wheel used for the 1st stage of metal polishing
Removes light marks left from preparation and are usually suitable for use with a grey compound
Suitable for a wide range of materials including iron, steel, aluminium, copper, Stainless steel, brass and nonferrous materials
Fastened together with leather washers for maximum support when using the mop
British Manufactured mops
Suitable for use with a bench grinder / polishing machine
Used on a taper spindle
SPECIFIC SPECIFICATIONS
DIAMETER OF THE MOP 10" (250mm)
WIDTH OF THE MOP 0.5" (1 ROW) (12.5mm)
MAXIMUM SPEED 3000RPM
MEDIUM STITCHED MOP
Professional tool for commercial or occasional use
Medium Polishing mop
Multi layered and tight stitched polishing mop to provide a top quality durable mop
Manufactured from 100% white cotton
Very versatile polishing and buffing wheel used for the first cut, general polishing or finishing.
Suitable for a number of materials including aluminium, alloys, brass, copper, steel and stainless steel
Normally used in the middle stage of the polishing process and are usually used with green compound
Good for a one shot polishing operation where you need the brightness back and the condition of the metal is not marked / scratched or badly pitted
Fastened together with leather washers for maximum support when using the mop
Suitable for use straight away
British Manufactured mops
Suitable for use with a bench grinder / polishing machine
Used on a taper spindle
SPECIFIC SPECIFICATIONS
DIAMETER OF THE MOP 10" (250mm)
WIDTH OF THE MOP 0.5" (1 ROW) (12.5mm)
MAXIMUM SPEED 3000RPM
G LOOSE FLOPPY MOP
Professional tool for commercial or occasional use
Suitable for the final stage polishing and finishing on nonferrous and ferrous surfaces
Most popular grade of finishing mop
100% cotton discs
Suitable for a wide range of materials including iron, steel, aluminium, copper, Stainless steel, brass and nonferrous materials such as plastics etc.
Also suitable for use on woods and resins
Fastened together with leather washers for maximum support when using the mop
Does not fray or leave as much dust as other finishing mops
British Manufactured mops
Suitable for use with a bench grinder / polishing machine
Used on a taper spindle
Suitable for use straight away
Normally used in the final stage of the polishing process and are usually used with blue compound
SPECIFIC SPECIFICATIONS
DIAMETER OF THE MOP 10" (250mm)
WIDTH OF THE MOP 0.5" (1 ROW) (12.5mm)
MAXIMUM SPEED 3000RPM
We have more products available in our store
Click Here